Roland Pro A/V - Support - XS-1HD

XS-1HD System Program (Ver.1.14)

If you're currently using a version earlier than 1.06

After updating the unit to the most recent version, executing the procedure in "Returning to the Factory Settings (Factory Reset)" to restore settings to their default values is required.
Before carrying out the update, save the settings on a USB flash drive that has been formatted on the XS-1HD.
* Apply the update by carrying out steps 1 through 5 in sequence.

HOW TO TELL THE VERSION

Please check the version of the system working on your XS-1HD before downloading the archive file.

Connect a monitor to the VIDEO OUTPUT 4 connector.
The menu appears on the monitor connected to VIDEO OUTPUT 4.
Turn on the power to the XS-1HD.
Press [ MENU ] to invoke the Root Menu screen.
Turn the [ CURSOR ] knob to choose System, and then press the [ ENTER ] button.
Use the [ CURSOR ] knob to display Version.
The version information screen appears.

* Don't perform the update if the product is already up-to-date.

VERSION HISTORY

[ Ver.1.14 ] 2024/12
Bug Fix
The following bug was fixed.

Fixed an issue where the menu (OSD) would not be displayed on the monitor connected to the VIDEO OUTPUT 4 terminal when starting with an output format other than 1080p.

Functionality Improvement

Changed the time when the auto-off function will work in 20 minutes.

[ Ver.1.13 ] 2022/06
Bug Fix
The following bug was fixed.

When the Key is Enable, PinP cannot turn off.

Functionality Improvement

Improvement downscaled image quality.
Improvement luminance key quality.

Function addition

Added simple chroma key.(Green1-3 / Blue1-3)

Others

Fixed problem in production.

[ Ver.1.12 ] DEC 2019
Bug Fix
The following bug was fixed.

When starting in Switcher Mode, the video of the output terminal different from the setting is output.

[ Ver.1.11 ] JAN 2019
Bug Fix
The following bug was fixed.

When the Screen Mode is set to "Switcher Mode," multi-view output from the VIDEO OUTPUT 4 connector sometimes fails to display correctly.

[ Ver.1.10 ] NOV 2018
Functionality Improvement

Formats were added to the EDID emulator.
720p, 1080i, 1080p
1024x768, 1280x720, 1280x800, 1366x768, 1280x1024, 1400x1050, 1600x1200, 1920x1080, 1920x1200

Bug Fixes
The following bugs were fixed.

Output to a channel different from the one specified by settings occurs at startup of the unit, when changing the mode, and when calling up a memory.
On some monitors, during output at 1280 x 1024 or 1366 x 768, the picture takes time to stabilize.
In extremely rare cases, the unit sometimes fails to start correctly.
The topmost line fails to be captured during 1080i input.

[ Ver.1.09 ] AUG 2018
Bug Fixes
The following bugs were fixed.

When the unit's "HDCP Enable" setting is in effect, on some monitors, some time is required until the picture appears.
When the XS-1HD is started while HDMI input is connected, the picture fails to appear immediately after startup.
Errors in EDID settings

[ Ver.1.08 ] JAN 2018

HDMI output connectivity when HDCP is enabled was improved.
The problem of the menu (OSD) display sometimes failing to disappear was corrected.

[ Ver.1.06 ] DEC 2017

Memory switching time was shortened.
Other minor bugs.

Items to prepare for the update

Following items are required to perform the update.

XS-1HD itself
Video Monitor (equipped with a HDMI input connector)
HDMI cable
PC to write the updater to the USB Flash Memory
USB Flash Memory
* If the XS-1HD does not recognize the USB flash memory, try using a different USB memory.

HOW TO DOWNLOAD AND EXPAND THE ARCHIVE FILE

Download the file named "xs1hd_sys_v114.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, the folder "xs1hd_sys_v114" holding the file "XS-1HD.PRG" will be appeared.

HOW TO UPDATE
Please install the system program "XS-1HD.PRG" to the XS-1HD by following the process below.
* While updating the unit, have a monitor connected to the VIDEO OUTPUT 4 connector.
Important notice: Never turn the XS-1HD off during the update process, or XS-1HD won't reboot correctly any more.

The update procedure differs depending on the version currently in use.

If you're using version 1.06 or later

The update can be accomplished by carrying out only Step 3: Updating the XS-1HD.

If you're using a version earlier than 1.06

Apply the update by carrying out steps 1 through 5 in sequence.

Step 1:Formatting a USB Flash Drive

Please refer to the "Formatting a USB Flash Drive" for detailed information in the [ Owner's Manuals ].

Connect the USB flash drive to the USB MEMORY port.
Press [ MENU ] to invoke the Root Menu screen.
Turn the [ CURSOR ] knob to choose File, and then press the [ ENTER ] button.
Turn the [ CURSOR ] knob to choose Format, and then press the [ ENTER ] button.
When the message "USB Memory Format" appears, use the [ CURSOR ] knob to select Execute, then press the [ ENTER ] button.
The USB flash drive is formatted.
When the message "Completed." appears, press the [ ENTER ] button.
Press the [ MENU ] button several times to close the menu.

Step 2:Saving the XS-1HD's Settings as a File on a USB Flash Drive

Please refer to the "Saving the XS-1HD's Settings as a File on a USB Flash Drive" for detailed information in the [ Owner's Manuals ].

Connect a USB flash drive formatted on the XS-1HD to the USB MEMORY port.
Press [ MENU ] to invoke the Root Menu screen.
Turn the [ CURSOR ] knob to choose File, and then press the [ ENTER ] button.
Use the [ CURSOR ] knob to select the "All Settings" option of Save as (Saving a new settings file) or Save (Overwrite-saving a settings file), then press the [ ENTER ] button.
(If you selected Save as) Set a folder name and press the [ ENTER ] button.
(If you selected Save) Specify a folder and press the [ ENTER ] button.
The XS-1HD's settings are saved on the USB flash drive.
When the message "Completed." appears, press the [ ENTER ] button.
Press the [ MENU ] button several times to close the menu.

Step 3:Updating the XS-1HD

Copy the update-use file ( XS-1HD.PRG ) inside the xs1hd_sys_v114 folder to the root directory of the USB Flash Memory.
* You can use the USB flash drive on which you saved the unit's settings in step 2.
While the power to the XS-1HD is turned off, connect the USB flash drive to the USB MEMORY port.
Hold down [ INPUT 1 ], [ INPUT 3 ], and [ COLOR ] in the XPT4 row and turn on the power.
* Continue holding down the buttons until the [ ENTER ] button lights up.
* When the [ ENTER ] button lights up, the message "14:SYSTEM UPDATE" appears on the monitor.
Pressing the [ ENTER ] button starts the update.
When all five buttons in the XPT1 row light up, the update is complete.
* When the update is complete, the message "COMPLETE" appears on the monitor.
Turn off the power to the XS-1HD and detach the USB flash drive.
Refer to "How to tell the version" and confirm that the version has been updated to show "1.14 b000."

Step 4:Returning to the Factory Settings (Factory Reset)

Please refer to the "Returning to the Factory Settings (Factory Reset)" for detailed information in the [ Owner's Manuals ].

Press [ MENU ] to invoke the Root Menu screen.
Turn the [ CURSOR ] knob to choose System, and then press the [ ENTER ] button.
Turn the [ CURSOR ] knob to choose Factory Reset, and then press the [ ENTER ] button.
When the message "Factory Reset" appears, use the [ CURSOR ] knob to select Execute, then press the [ ENTER ] button.
Factory reset is executed.
When the message "Completed." appears, press the [ ENTER ] button.
Press the [ MENU ] button several times to close the menu.

Step 5:Loading Unit Settings Saved on a USB Flash Drive

Please refer to the "Saving the XS-1HD's Settings as a File on a USB Flash Drive" for detailed information in the [ Owner's Manuals ].

Connect the USB flash drive on which the XS-1HD's settings are saved to the USB MEMORY port.
Press [ MENU ] to invoke the Root Menu screen.
Turn the [ CURSOR ] knob to choose File, and then press the [ ENTER ] button.
Use the [ CURSOR ] knob to select the "All Settings" option of Load, then press the [ ENTER ] button.
Select the folder containing the saved settings you want to load, then press the [ ENTER ] button.
The settings are loaded, overwriting the contents of memory in the XS-1HD.
When the message "Completed." appears, press the [ ENTER ] button.
Press the [ MENU ] button several times to close the menu.

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the XS-1HD. This update data may destroy the data or system program of other products.
Never power-off your XS-1HD while the update is in progress!
If a power failure or similar accident occurs during the update process, the XS-1HD won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Roland Software License Agreement


In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.


2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.


3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.


4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.


5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.


6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.


7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

I AGREE AND WISH TO PROCEED WITH DOWNLOAD.

XS-1HD System Program (Ver.1.14)

Support

Quick Links