Roland Pro A/V - Support - VC-30HD

VC-30HD System Program ( Ver.1.021 )

How to tell the version

Please check the version of the system working on your VC-30HD before downloading the archive file.

Procedure which used the VC-30HD RCS

Run the VC-30HD RCS and then connect your VC-30HD to your computer. The version number of the VC-30HD is displayed in the "Signal Display Section" of the VC-30HD RCS.

Procedure which does not use the VC-30HD RCS

Immediately after sliding the [POWER] switch to [ON] position , long-push the [VIDEO INPUT] and the [OUTPUT FORMAT] buttons both within a few seconds.
Keep pushing the buttons until all the indicators blink except the "SENS" indicators.
When they did so, connect VC-30HD to your Windows computer via USB.
The drive named as "VC-30HDxxxx" appears on your computer. The "xxxx" indicates the version number.
(If it is "Ver.1.010", the drive name will be the "VC-30HD1010")
Turn off VC-30HD to end the version check.

* Don't perform the update if the product is already up-to-date.

[ Ver.1.021 ]

Function Improvements

In addition to the i.LINK connector and the USB connector on the rear panel, Video signal can be output from the i.LINK connector on the front panel simultaneously.

Items to prepare for the update

Following items are required to perform the update.

VC-30HD itself
USB Cable
Windows computer ( Windows 7 / Windows Vista )
* Apple Macintosh cannot be used for updating.
* Windows 8 / 8.1 cannot be used for updating.

Caution when performing the update

Never apply this update data to any product other than the VC-30HD. This update data may destroy the data or system program of other products.
Never power-off your VC-30HD while the update is in progress!
If a power failure or similar accident occurs during the update process, the VC-30HD won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

How to download and expand the archive file

Download the file named "vc30hd_sys_v1021.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, the folder "vc30hd_sys_v1021" holding the file "VC-30HD1021.PRG" will be appeared.

How to update

Please install the system program " VC-30HD1021.PRG" to the VC-30HD by following the process below.
Important notice: Never turn the VC-30HD off during the update process, or VC-30HD won't reboot correctly any more.

Immediately after sliding the [POWER] switch to [ON] position , long-push the [VIDEO INPUT] and the [OUTPUT FORMAT] buttons both within a few seconds.
Keep pushing the buttons until all the indicators blink except the "SENS" indicators.
When they did so, connect VC-30HD to your Windows computer via USB.
The drive named as "VC-30HDxxxx" appears on your computer. The "xxxx" indicates the version number.
(If it is "Ver.1.010", the drive name will be the "VC-30HD1010")
Open the "VC-30HDxxxx" drive in the "My Computer" (or "Computer") on the Explorer.
Copy (drag and drop) the "VC-30HD1021.PRG" in the "vc30hd_sys_v1021" folder to the root directory in the "VC-30HDxxxx" drive.
When the copy processing is completed, un-mount the USB drive on your computer.
Turn off VC-30HD to complete the update procedure.
Refer to the "How to tell the version" section of this document to verify that the version number has been updated to this version.

Roland Software License Agreement


In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.


2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.


3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.


4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.


5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.


6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.


7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

I AGREE AND WISH TO PROCEED WITH DOWNLOAD.

VC-30HD System Program ( Ver.1.021 )

Support

Quick Links