V-160HD System Program ( Ver.3.41 )

HOW TO FIND THE VERSION
Please check the current version of the system program on your V-160HD before downloading the file.
  1. Press the [MENU] button to display the menu.
  2. Turn the [VALUE] knob to select "SYSTEM", then press the [VALUE] knob.
  3. Turn the [VALUE] knob to select "VERSION" and check the version.
    *If the latest version is shown, no update is necessary.
UPDATE HISTORY
[Ver.3.41] JUL 2025
Bug Fixes
The following problems have been fixed.
  • When camera control is performed while connected to VenuSet, VenuSet is not updated with the status of the unit.
[Ver.3.40] JUN 2025
Additional Functions
  • LAN/RS-232 Basic Control Commands are now supported.
    Please refer to "LAN/RS-232 Basic Control Commands" for details.
  • Support for the "VenuSet" control app was added.
Functionality Improvements
  • Responsiveness has been improved for the tally lamp illumination function in camera control.
Bug Fixes
The following problems have been fixed.
  • In rare cases, video fails to be output in SDI output.
  • In rare cases, the video in PinP&key freezes at startup or when the output format is changed.
[Ver.3.30] APR 2025
Additional Functions
  • A function has been added that lets you select the channel of the VC-100UHD connected to the network.
  • Please refer to "V-160HD Reference Manual" for details.
Bug Fixes
The following problems have been fixed.
  • SDI output sometimes stops when the setting for REFERENCE has been changed.
  • Other minor bug fixes.
[Ver.3.20] DEC 2024
Functionality Improvements
  • A warning is now shown on the menu screen when the unit is overheating.
Bug Fixes
The following problems have been fixed.
  • From ver.3.10 onwards, the video output becomes unstable due to heat generation during operation.
  • When AUX LINKED PGM is enabled, MASTER OUTPUT is output even if the AUDIO OUTPUT ASSIGN is set to "AUX 1" through "AUX 3".
  • The Smart Tally page can't be opened in Safari on iOS 18 or later.
[Ver.3.11] OCT 2024
Bug Fixes
The following problems have been fixed.
  • When Roland FILL+KEY MODE is enabled, the DSK video is shown out of alignment, depending on the system format and frame rate settings.
[Ver.3.10] OCT 2024
Additional Functions
  • Key compositing using the Fill+Key signal from the Windows-only program Graphics Presenter is now supported.
  • Functionality has been added that enables the Windows-only program Graphics Presenter to be operated using the USER buttons, footswitches connected to the CTL/EXP jacks, GPI, and a USB numeric keypad.
    Connecting the V-160HD via a USB cable to a computer running Graphics Presenter lets you control Graphics Presenter from the V-160HD.
  • Functionality has been added that lets you assign specific input buses to the respective AUDIO INPUT LEVEL knobs.
  • Functionality has been added that lets you assign specific output buses to the respective audio output knobs (AUX, USB STREAM, and MASTER OUTPUT).
Functionality Improvements
  • The internal processing for PinP & KEY and DSK chroma key compositing has been improved, and background color can now be passed more accurately.
    "VALUE FINE" and "VALUE WIDTH" parameters have been added, enabling fine adjustment of the amount of extraction.
  • A function "DESPILL" has been added to remove background color near the border in PinP & KEY and DSK chroma key compositing.
    Setting DESPILL to "ON" enables you to remove bleeding background color near the border with the transparent portion.
  • A setting has been added to the LOAD PARAMETER menu item for PRESET MEMORY that enables AUX 1 through 3 to be switched on and off individually.
  • When PROTOCOL is set to "Avonic" or "PTZ Optics", you can now use the camera control function to specify the port number.
Bug Fixes
The following problems have been fixed.
  • In rare cases, the video is briefly corrupted immediately after a video transition.
  • Smart Tally operation sometimes stops.
  • The output status of the relevant video bus is not reflected in the tally information when AUX, PinP&KEY, or DSK is set to "Enable" at TALLY SETTINGS.
  • The REVERB effect is weaker than expected.
  • Other minor bug fixes.
[Ver.3.02] APR 2024
Bug Fixes
The following problems have been fixed.
  • In rare cases, button operation does not work when "PRESET MEMORY 11" to "PRESET MEMORY 30" is assigned to USER SW.
  • The login screen of Smart Tally does not open in certain browsers.
  • Other minor bug fixes.
[Ver.3.01] FEB 2024
Bug Fixes
The following problems have been fixed.
  • The color of the video input to the HDMI IN 3 connector is distorted.
[Ver.3.00] FEB 2024
Additional Functions
  • "AUX 2" and "AUX 3" have been added to the video output bus.
    By pressing and holding the [MODE] button while MODE is set to "AUX," you separately select the video sent to the AUX 2 bus using the PGM/A [1] to [10] buttons and the video sent to the AUX 3 bus using the PST/B [1] to [10] buttons.
    * Along with this, the indication of the "AUX" bus has been changed to "AUX 1".
  • "DSK 1 SOURCE" and "DSK 2 SOURCE" have been added to OUTPUT ASSIGN for video.
    This lets you assign the video chosen for the respective DSK video sources to output jacks.
  • "AUX 2" and "AUX 3" have been added to the audio output bus.
    * Along with this, the indication of the "AUX" bus has been changed to "AUX 1".
  • A loudness auto gain control function has been added to the MASTER OUTPUT bus for audio output.
  • An adaptive noise reduction/low-frequency cut function has been added to the MASTER OUTPUT bus for audio output.
  • Functionality has been added that allows fine adjustment of color for WIPE BORDER, PinP BORDER, DSK FILL, DSK EDGE, and SPLIT BORDER.
    Setting the color to "CUSTOM" lets you adjust the respective RGB values to any number from "0" to "255".
  • A SOLO function has been added to the audio-output MASTER OUTPUT bus and AUX bus.
  • Functionality has been added that lets you control PTZ camera operations such as pan, tilt, and zoom using the USER SW.
  • Functionality has been added that lets you control PTZ camera operations such as pan, tilt, and zoom using CTL, GPI, or a numeric keyboard.
  • Functionality has been added that enables adjustment with greater granularity when manipulating PinP&KEY parameters using the [POSITION H] and [POSITION V] knobs.
    Holding down the [EXIT] button while turning the knob lets you adjust in steps of 0.1% (in steps of 1% for ZOOM).
  • Functionality has been added that enables adjustment with greater granularity when manipulating SPLIT parameters using the [PGM/A-CTR] and [PST/B-CTR] knobs.
    Holding down the [EXIT] button while turning the knob lets you adjust in steps of 0.1%.
  • Functionality has been added to switch the assignment for the USB OUT audio bus in tandem with the assignment for video output. Using the [MENU] button > 10: AUDIO OUTPUT > 1: OUTPUT ASSIGN > USB OUT to select "AUTO" lets you interlink the assignment for the audio bus to the video output bus from a USB port.
Functionality Improvements
  • The system has been changed so that you can now send REVERB effect sound to the AUX bus for audio output.
    You can use "REVERB RETURN LEVEL" for the respective AUX bus to set the amount of audio returned.
  • The system has been changed so that you can now adjust the amount of audio sent to the AUX bus in steps of 0.1 dB for each respective audio input.
  • The system has been changed so that when LOAD PRESET MEMORY is assigned to a USER button, pressing and holding the button now lets you save the current scene to a preset memory.
    This lets you perform the same operations as the MEMORY [1] to [10] buttons when MODE is set to "PRESET MEMORY".
    * Along with this, the indication has been changed from "LOAD PRESET MEMORY" to "PRESET MEMORY".
  • The system has been changed so that when STEREO LINK for audio-input AUDIO IN 1 and 2 is set to "ON," the content of operations to AUDIO IN 2 made using knobs, USER buttons, or an external controlling device is applied.
    Operations made using the AUDIO IN 2 control, operations made when "AUDIO IN 2 MUTE" or the like is assigned to a USER button, and other such operations now act upon both linked channels.
  • The system has been changed so that you can now set the switching target to the DSK source video using the INPUT SCAN value for AUTO SWITCHING.
    Setting SCAN TARGET to "DSK 1" or "DSK 2" enables automatic switching of the DSK source video.
  • The system has been changed so that you can now use the audio follow function to directly specify HDMI 1 to 8, SDI 1 to 8, or STILL 1 to 16 as TARGET for each respective audio input.
  • The system has been changed so that you can now specify the video interlinked with INPUT ASSIGN as the video source for the video-output AUX bus.
  • The system has been changed so that you can now specify video interlinked with INPUT ASSIGN as the video source for PinP&KEY or DSK.
  • The setting "N/A" for changing an assignment to nothing has been added to INPUT ASSIGN.
    This makes it possible to prevent inadvertent operation when some INPUT 1 to 10 (or INPUT 1 to 20) lines are unused.
Bug Fixes
The following problems have been fixed.
  • When the SIZE value for PinP&KEY is less than "100.0%," the video in the inset screen is slightly enlarged and partly cut off.
  • In rare cases, operational responsiveness of the V-160HD is delayed.
  • Other minor bug fixes.
[Ver.2.04] OCT 2023
Bug Fixes
The following problems have been fixed.
  • SDI output signals deviate partially from the specifications.
  • In rare cases, PinP&KEY video becomes corrupted when the REFERENCE setting is changed.
  • Other minor bug fixes.
[Ver.2.03] JUL 2023
Additional Functions
  • A START UP PRIORITY function has been added.
    Whether scene memory or the panel state has priority at startup can now be set.
  • A function has been added that enables use of a test pattern instead of video as video input via the HDMI IN 5-8 connectors.
Functionality Improvements
  • The high-band accuracy of HDMI and SDI input audio has been improved.
  • The amount of latency that differed depending on audio input channel, audio output channel, and path has been made consistent.
Bug Fixes
The following problems have been fixed.
  • Updating the tally border on the monitor is sometimes delayed when FRAME RATE is set to "30Hz," "29.97Hz," or "25Hz".
  • It is not possible to input HDMI embedded audio ch.3 or later depending on the connected device.
  • When the unit is restarted while the phase is synced to REF IN, the phase is sometimes out of sync.
  • The phase of audio input from the AUDIO IN 1, 2 jacks is inverted.
  • Other minor bug fixes.
[Ver.2.02] APR 2023
Additional Functions
  • The color space for HDMI input can now be selected manually.
Functionality Improvements
  • Tally information can now be linked to AUX, PinP&key, and DSK.
    The status of output to the relevant video bus is reflected in the tally data when you set each parameter to "ENABLE" at the [MENU] button > 20: RS-232/TALLY/GPO/GPI/KEY > 2:TALLY/GPO > TALLY SETTINGS.
  • Improved the color conversion of the video output from USB STREAM.
Bug Fixes
The following problems have been fixed.
  • Backup files created with system program versions earlier than Ver. 1.15 could not be loaded.
  • Variations in color were degraded on the video displayed in the PinP&KEY inset screen.
  • Audio input has a phase difference between LRs.
  • When the output format of any connector is 1080i, video transition effects become jerky.
  • Other minor bug fixes.
[Ver.2.01] MAR 2023
Bug Fixes
The following problems have been fixed.
  • In rare cases, the video in PinP&key becomes corrupted at startup or when the output format is changed.
  • Video sometimes shakes when 1080i video is input to SDI input and freeze is turned on.
  • In LAN control communication, if the newline code is CR, the command cannot be interpreted.
  • Other minor bug fixes.
[Ver.2.00] FEB 2023
Additional Functions
  • A function has been added to change USB video output only to 720p output when the system format is 1080p.
  • A function has been added for applying "PinP&KEY" and "DSK" effects to AUX-bus video.
    Using the [MENU] button > 1: VIDEO ASSIGN > AUX LAYER enables selection of "OFF" (always off), "PGM SYNC" (syncing with the on/off status of the PGM bus), or "ON" (always on).
  • A function has been added to record panel operations and generate a macro.
    When MODE is set to "MACRO", pressing and holding the MACRO button for the macro number you want to record to lets you record panel operations to a macro.
  • A DISSOLVE mode has been added to PANEL OPERATION.
    This is a mode for assigning video to all 20 of the PGM/A [1] through [10] and PST/B [1] through [10] buttons and switching the video instantly by pressing the respective PGM/A or PST/B button. Behavior when the video is switched can be selected using the [CUT] button or the [AUTO] button.
  • A PGM/PST(20) mode has been added to PANEL OPERATION.
    This is a mode for assigning video to all 20 of the PGM/A [1] through [10] and PST/B [1] through [10] buttons and selecting the preview output video by pressing the respective PGM/A or PST/B button. The final video output can be switched using the [CUT] button or the [AUTO] button.
  • Functions for saving only PRESET MEMORY content to a USB flash drive and recalling only PRESET MEMORY content from a USB flash drive have been added.
  • A function has been added that lets you freely assign video to the respective 16 INPUT-VIEW screens.
    Using the [MENU] button > 24: SYSTEM > 16 INPUT-VIEW LAYOUT, you can specify the video sources and the video interlinked with INPUT ASSIGN.
  • A function has been added to select the channel of embedded audio input via SDI or HDMI.
    Using the [MENU] button > 9: AUDIO INPUT > HDMI IN 1 through 10 or SDI IN 1 through 10 > EMBEDDED AUDIO CH, you can select from among "1/2", "3/4", "5/6", and "7/8".
  • "23.98Hz", "24Hz", "25Hz", "29.97Hz", and "30Hz" have been added to the system frame rate.
    *You can select this when the system format is "1080p".
  • A function has been added that lets you operate the V-160HD using a numeric keyboard connected via USB.
    Using the [MENU] button > 20: RS-232/TALLY/GPO/GPI/KEY > 4: NUMERIC KEYPAD, you can assign actions to the keys.
  • A function has been added to auto switching to automatically switch the PinP & KEY or DSK source irrespective of the INPUT ASSIGN value.
    Setting TYPE for AUTO SWITCHING to "PinP & KEY 1 SCAN" to "PinP & KEY 4 SCAN" or "DSK 1 SCAN" to "DSK 2 SCAN" enables automatic switching using the HDMI, SDI, or STILL video sources.
Functionality Improvements
  • A function has been added that lets you change the output format of each individual video output connector to 1080i when the system format is "1080p".
    The "1080i" system format has been removed. To obtain interlaced output, set the system format to "1080p" and set the output format of the respective connector to "1080i".
  • AUX can now be selected using MULTI-VIEW LAYOUT.
  • Separator lines have been added to MULTI-VIEW, 16 INPUT-VIEW, and 16 STILL VIEW.
  • MACRO EXECUTE and "LOAD MEMORY" have been added to USER SW ASSIGN.
  • The panel lock function now lets you lock the SPLIT, PinP, and DSK controls individually.
  • Operation has been changed so that SPLIT, PinP, and DSK can now be set individually using the LOAD PARAMETER setting for preset memories.
  • The value "PST" to which the preview output video at the current point in time can be switched has been added to the "PGM TAKE" value of the macro function's FUNCTION parameter.
  • MEMORY FADE TIME to control the fade time for preset memories and "MEMORY FADE ON/OFF" to toggle fade on or off for each individual effect have been added to the macro function's FUNCTION parameter.
  • Changed to load sample data of still images and preset memory when it is in factory default state or a factory reset is performed.
  • The screen shown at startup has been changed.
  • A feature has been added to the audio follow function for linking the audio to the ON/OFF status of the PinP&KEY or DSK.
    From the [MENU] button > 11: AUDIO FOLLOW, set PinP&KEY 1 FOLLOW through PinP&KEY 4 FOLLOW or DSK 1 FOLLOW through DSK 2 FOLLOW to "ON" to link the ON/OFF state of each effect with the audio output.
Bug Fixes
The following problems have been fixed.
  • On restarting after changing the name of a preset memory, the preset memory is sometimes initialized.
  • Setting Audio Follow to ON sometimes results in a factory reset taking a long time.
  • The picture is sometimes corrupted when interlaced video is input while the system format is set to "1080i".
  • If the Bluetooth connection is lost, it may not be possible to reconnect.
  • Turning the power back on may cause the loss of synchronization between the unit and the sync signal input to the REFERENCE IN connector.
  • Other minor bug fixes.
[Ver.1.15] AUG 2022
Bug Fixes
The following problems have been fixed.
  • Other minor bug fixes.
[Ver.1.14] JUL 2022
Bug Fixes
The following problems have been fixed.
  • When using chroma key in DSK or PinP & KEY, the parameters of key color is not set correctly.
[Ver.1.13] JUN 2022
Bug Fixes
The following problems have been fixed.
  • When the system format is set at "1080i", output video is sometimes corrupted when interlaced video is input.
  • When the system format is set at "1080i", video is sometimes momentarily corrupted when a preset memory is recalled.
  • When the system format is set at "720p", the rightmost column of pixels in PGM output is displayed lowered by several pixels.
  • When the reference clock is set to "EXTERNAL", video sent from the SDI OUT connectors sometimes lacks audio.
  • When an PNG images containing transparency information (alpha) is read in, the screen's topmost row of pixels is sometimes not transparent.
  • With the camera control function, functioning is slow during ZOOM TELE (SLOW) or TELE (FAST) operation.
  • Other minor bug fixes.
[Ver.1.12] MAY 2022
Functionality Improvements
  • Operation has been changed so that when AUX LINKED PGM is enabled, audio from PHONES OUT now follows the status of AUX LINK.
  • Operation has been changed so that when STILL IMAGE OUTPUT is enabled, a notification screen is now displayed while the menu is closed.
    STILL OUTPUT can be disabled by pressing the [EXIT] button at the notification screen.
  • STILL 1 to 16 and INPUT 1 to 10 have been added to TALLY/GPO ASSIGN.
    With STILL 1 to 16, information is output on whether a still images is output.
    With INPUT 1 to 10, information is output on whether the respective cross-point video is output.
Bug Fixes
The following problems have been fixed.
  • Some PTZ cameras cannot be controlled correctly.
  • When INPUT LEVEL is changed while MUTE for audio input is in the ON state, audio fails to be unmuted when MUTE is set to OFF.
  • When using DSK while the DSK MODE parameter is set to SELF KEY and the TYPE parameter is set to CHROMA, a non-transparent picture sometimes appears briefly when DSK SOURCE is switched.
  • Other minor bug fixes.
[Ver.1.11] FEB 2022
Bug Fixes
The following problems have been fixed.
  • PinP and split video is sometimes briefly corrupted when a preset memory is loaded.
[Ver.1.10] FEB 2022
Bug Fixes
The following problems have been fixed.
  • Macro data created using version 1.08 or earlier cannot be read in correctly.
  • Other minor bug fixes.
*When you have used the MACRO function on Ver.1.09, then after updating to version 1.10, the data sometimes cannot be read in correctly.
Before updating to version 1.10, from the MENU screen, select MACRO, then LIST EDIT, and make sure the macro setting values are all correct. Then use SAVE TO USB MEMORY to save the data to a USB flash drive.
In cases when data cannot be read in correctly after updating to version 1.10, reimporting the data saved on the USB flash drive enables the data to be used.
[Ver.1.09] JAN 2022
Additional Functions
  • FUNCTION "PinP VIEW" and "PinP CROPPING" parameters have been added to the MACRO function.
    For PinP, the position and size of the picture in the window and the aspect ratio of the window can now be controlled from the MACRO function.
Functionality Improvements
  • The operation has changed so that PinP and SPLIT images can animate independently for each parameter using FUNCTION "PinP KEY WINDOW" and "SPLIT POSITION" in the MACRO function.
Bug Fixes
The following problems have been fixed.
  • When a still image is exported to a USB flash drive, the image contains noise.
  • Some camera video output at 1080/24p cannot be input via HDMI.
  • When 1080i video is input via SDI, synchronization fails even when REFERENCE is set to that channel.
[Ver.1.08] DEC 2021
Additional Functions
  • Version 1.0.0 of the V-160HD RCS dedicated remote control software for Windows / Mac is now supported.
  • Please refer to "V-160HD RCS Connection Guide" for details.
Bug Fixes
The following problems have been fixed.
  • HDMI IN 5 through 8 video is sometimes vertically misaligned slightly.
  • The video is sometimes momentarily corrupted immediately after video is switched.
  • When the "MONO" setting for audio input is set to any value other than OFF, it fails to be applied correctly to AUX output.
  • Other minor bug fixes.
[Ver.1.07] NOV 2021
Additional Functions
  • EFFECTS TRANSITION SYNC has been added as an assignment for the USER buttons.
    This makes it possible to switch EFFECTS TRANSITION SYNC between enabled and disabled.
  • A setting has been added that enables USB video output to be set fixed to uncompressed (YUY2).
    The setting can be made using the unit's menu > VIDEO OUTPUT > USB OUT > OUTPUT FORMAT item.
Bug Fixes
The following problems have been fixed.
  • The colors in incoming video sometimes change when certain equipment is connected to HDMI 1 - 6.
  • The wait specified by the set value does not take place when the MACRO function's FUNCTION parameter is set to "WAIT."
  • When a preset memory is recalled while EFFECTS TRANSITION SYNC is set to ON, items for which LOAD PARAMETER is set to OFF are sometimes loaded.
[Ver.1.06] OCT 2021
Functionality Improvements
  • Functionality has been changed so that images having the ".jpeg" file extension can be imported.
  • Image quality when inputting interlace video to HDMI 5 through 8 has been improved.
Bug Fixes
The following problems have been fixed.
  • In rare cases, video input to HDMI 5 through 8 and video in the PinP inset screen is corrupted.
  • Other minor bug fixes.
[Ver.1.05] SEP 2021
Functionality Improvements
  • With the camera control function, when PROTOCOL is set to VISCA over IP, PTZOptics, or Avonic, the camera's tally light now no longer lights up if it is selected as PST.
Bug Fixes
The following problems have been fixed.
  • When repeated Bluetooth reconnections to iPad Remote are made, connection sometimes becomes impossible.
  • The picture sometimes flickers when 1080i video is input.
  • Every time the system is started, PinP and DSK do not fade out when PRESET MEMORY is switched, but only on the first attempt.
  • PinP and DSK sometimes fail to be displayed when PRESET MEMORY is switched instantly while EFFECTS TRANSITION SYNC is set to ON.
  • Camera control is not possible when the protocol is changed to JVC.
  • Other minor bug fixes.
[Ver.1.04] AUG 2021
Additional Functions
Functionality Improvements
  • Operation has been changed so that with AUDIO EFFECT or AUDIO EMBEDDED, whether volume level adjustment by the faders is included is now selectable. There are three selections: DRY, PRE FADER, and POST FADER.
  • Operation has been changed so that commands can be processed even when no STX is sent via Telnet.
  • Operation has been changed so that the timing with which Telnet commands are processed is now when a line feed (LF) is received.
  • The processing times during operation of the sequencer functions NEXT, PREV, and JUMP have been shortened.
  • Operation has been changed so that when the HDMI OUT 3 assignment is switched, the switching for labels, audio level meters, and the like is carried out more smoothly.
Bug Fixes
The following problems have been fixed.
  • Panel operation becomes sluggish when the QR code is displayed using LAN CONTROL or INFORMATION.
  • Output volume sometimes briefly goes to an unintended level immediately after a memory recall operation.
  • Error numbers during RS-232 communication or Telnet were not correct.
  • The PinP SAMPLING feature is nonfunctional.
  • INITIALIZE ALL for PRESET MEMORY is nonfunctional.
  • ECHO CANCELLER does not function correctly.
  • The picture is sometimes corrupted when 480p or 576p video is input via HDMI 5 though 8.
  • Other minor bug fixes.
WHAT YOU NEED FOR THE UPDATE
  • V-160HD
  • USB flash drive
    *When using a USB flash drive for the first time, you must format it using the V-160HD.
CAUTION WHEN PERFORMING THE UPDATE
  • Never apply this update data to any product other than the V-160HD. This update data may destroy the data or system program of other products.
  • Never power-off your V-160HD while the update is in progress!
    If a power failure or similar accident occurs during the update process, the V-160HD won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program.
DOWNLOADING AND UNARCHIVING THE COMPRESSED FILE
  1. Read the software license agreement at the bottom of the screen and select the "I agree" check box.
  2. Click the "Download" button to download the system program (v160hd_sys_v341.zip).
  3. Unarchive the downloaded file.
    • Windows:Right-click the file and select "Extract All", then click "Extract".
    • Mac: Double-click the file to unzip it.
      -The "v160hd_sys_v341" folder appears.
  4. Connect the USB flash drive formatted with V-160HD to your computer.
  5. Open the "v160hd_sys_v341" folder, then copy "V-160HD.PRG" to the level displayed immediately upon accessing the USB flash drive (the USB flash drive's root directory).
    *DO NOT rename the file (V-160HD.PRG) in the folder.
UPDATE PROCEDURE
  1. Connect the USB flash drive to the USB MEMORY port.
  2. Hold down the [DSK 1 PGM] button, [DSK 2 PGM] button, and [PinP & KEY 2 PGM] button and turn on the power.
    Keep pressing and holding the three buttons until their LEDs light up.
  3. When the display shows "SYSTEM UPDATE PRESS [ENTER]", press the [VALUE] knob.
    The update starts.
    *The update takes about two minutes.
    *Never power-off your V-160HD while the update is in progress.
  4. When the display shows "UPDATE COMPLETED PLEASE RESTART", press the [POWER] button to turn off the power.
  5. Disconnect the USB flash drive from the USB MEMORY port.
  6. Turn on the power, and verify that the V-160HD updated to the latest version.
    *While the first startup follows an update, update processing for the display executes. This process might make the brightness dark, but it is not a malfunction. Wait about 20 seconds until the unit starts up.

Support

Quick Links