Tutorial

M-200i Tutorials

M-200i: Connecting an iPad with a Wireless Router

  • Views: 4,029
  • 0

See how to connect a wireless router to your Roland M-200i V-Mixer to use as the wireless access point for your iPad.

M-200i: Connecting an iPad with a Wireless Router

M-200i: Connecting an iPad with a Wireless Router

See how to connect a wireless router to your Roland M-200i V-Mixer to use as the wireless access point for your iPad. Watch video.

M-200i: Connecting an iPad with a Wireless USB LAN

M-200i: Connecting an iPad with a Wireless USB LAN

See how to connect an iPad to the Roland M-200i V-Mixer using a wireless USB LAN device in ad-hoc mode. Watch video.

M-200i: Patching and Routing Signals

M-200i: Patching and Routing Signals

See how to patch your inputs and outputs on the Roland M-200i V-Mixer. Watch video.

M-200i: Setting up a Channel

M-200i: Setting up a Channel

See the various parameters associated with a channel strip on the Roland M-200i V-Mixer. Watch video.

M-200i: Adjusting EQ on Input Channel or Output Bus

M-200i: Adjusting EQ on Input Channel or Output Bus

See how to adjust EQ parameters on input channels or output buses on the Roland M-200i V-Mixer. Watch video.

M-200i: Sending Audio to Output Buses

M-200i: Sending Audio to Output Buses

See how to send audio to output buses such as Mains, AUX and/or Matrices on the Roland M-200i V-Mixer. Watch video.

M200i: Creating an Effect Loop (Reverb, Delay, Chorus)

M200i: Creating an Effect Loop (Reverb, Delay, Chorus)

See how to setup an effect loop that is typically used on Reverb, Delay and Chorus effects. Watch video.

M200i: Inserting an Effect into a Channel

M200i: Inserting an Effect into a Channel

See how to insert an effect onto a channel on the Roland M-200i V-Mixer. Watch video.

M-200i: Using Dynamics - Gates & Compressors

M-200i: Using Dynamics - Gates & Compressors

See how to setup and control Gates and Compressors in the Roland M-200i V-Mixer. Watch video.

M200i: Recording/Playback with USB Flash Drive

M200i: Recording/Playback with USB Flash Drive

See how to playback from or record to the USB flash drive on the Roland M-200i V-Mixer. Watch video.

M-200i: Setup DCA and Mute Groups

M-200i: Setup DCA and Mute Groups

See how to setup a DCA group that will allow you to control multiple channels using one fader. Also see how to setup Mute Groups and then assign a particular Mute Group to a quickly accessible User Button. Watch video.

M200i: Sharing a Microphone on Two Channels

M200i: Sharing a Microphone on Two Channels

See how to setup a single input source (like a mic) to use two different channels. This allows that mic to be used by two different applications with completely different dynamic, EQ, bussing configurations. Watch video.

M200i: Using Scenes

M200i: Using Scenes

See how to store and recall Scenes on the Roland M-200i V-Mixer. Watch video.

M200i: Using Tap Tempo for Delay Effects

M200i: Using Tap Tempo for Delay Effects

See how to setup Tap Tempo for delay effects and then assign it to a user button for easy access. Watch video.

M200i: Using the Graphic EQ

M200i: Using the Graphic EQ

See how to access and setup the 31-band graphic EQ on the Roland M-200i V-Mixer. Watch video.

Videos